A composite front door in the UK typically costs somewhere between £550 and £2,350 fully installed, according to a 2026 price guide. The gap is wide because the price depends on four things: whether you buy supply-only or fitted, the glazing, the finish and hardware, and whether the frame needs replacing. Once you know how each one moves the total, a quote is easy to read. At Value Doors you can order composite doors supply-only or fully fitted, so you can price both routes on the same door.
This guide covers who each price band suits, what a fitted price should include, what the extras cost and how to compare quotes like for like.
TL;DR
- Expect roughly £550 to £2,350 for a fully installed composite front door in the UK, with the final figure set by glazing, finish, hardware and frame work.
- Supply-only suits contractors and confident installers. Fitted suits homeowners and property managers who want one price and one point of contact.
- Common extras are decorative glazing (£200 to £400), a new outer frame (£200 to £400) and sidelights or toplights (£200 to £500 each).
- Compare quotes on the same brand and specification, and check that each is a true installed price with a FENSA certificate.
- Value Doors delivers supply-only orders in 10 working days and fitted orders in 3 to 4 weeks.
Table of Contents
- What a composite front door costs in the UK
- Supply-only or fitted: which route fits you
- What a fitted price should include
- The extras that move the price
- Style changes the shopping list, not only the price
- Composite and uPVC: how the costs compare
- How to compare composite door quotes
- Our view: why a straightforward quote saves money
- Choosing your door with Value Doors
- FAQ
- Sources
What a composite front door costs in the UK
A composite door is built from a mix of materials: typically a GRP (glass-reinforced plastic) skin over an insulating core, set in a frame. It is a popular choice because it looks like painted timber, needs little maintenance and insulates well. For the buyer, the main question is how the price splits between the door and the work of fitting it.
A 2026 UK guide gives a fully installed range of £550 to £2,350 for a composite front door. It also notes that a 10-year manufacturer guarantee is typical. Treat the range as a map, not a quote. A plain, single-colour door with no glazing sits at the bottom. A door with a decorative glazed panel, a colour match, upgraded hardware and a new frame sits near the top.
The table below shows how the price tends to build up.
| Price element | What it covers | Where it sits |
|---|---|---|
| Door slab and frame | The door leaf, frame, standard lock and seals | Sets the base price |
| Fitting | Labour, removal and disposal of the old door, making good | Added for fitted orders |
| Glazing | Plain, decorative or bespoke glass | Adds to the base |
| Finish | Standard colour or bespoke RAL or dual colour | Adds to the base |
| Hardware | Handles, letterplate, knocker, locks | Adds to the base |
| Frame and side panels | New outer frame, sidelights, toplights | Adds to the base |
Supply-only or fitted: which route fits you
This is the first decision, and it changes the number more than any other.
Supply-only means you buy the door and arrange the fitting yourself, or hand it to your own installer. It suits contractors who fit doors every week, builders running a refurbishment and property managers with a trusted maintenance team. The price is lower, and you control the schedule. The trade-off is simple: you are responsible for measuring accurately, and for who fits it and when.
Fully fitted means one supplier prices the door and the installation together. It suits homeowners replacing a single front door, and property managers who want a single invoice and one point of contact. You get one price, and you do not have to find and book a fitter.
Speed matters in both cases. Value Doors delivers supply-only orders in 10 working days, and fitted orders take 3 to 4 weeks. That is worth knowing if you are planning around a tenant move, a sale or a building programme.
If you want to see what the door itself costs on each route, start from the composite door range and request both a supply-only and a fitted quote on the same model.

What a fitted price should include
A fitted quote is only useful if it covers the whole job. Typical installer quotes cover removal and fitting, hinges, locks, handles and weather seals, alignment, FENSA or CERTASS registration for glazed external doors, and disposal of the old door. The same source says such quotes generally leave out VAT at 20% if it is not stated, rotten frame or brickwork repairs, internal architrave, plastering and decorating, and structural alterations.
That last group is where surprises appear. A door fits neatly into a sound opening. If the old frame has rotted or the brickwork is damaged, the repair is a separate job. Ask for a site survey before you commit, so that anything unusual is in the quote and not found on fitting day.
Why the FENSA certificate matters
FENSA is a registration scheme for installers. Its certificate is proof that replacement external windows and doors comply with Building Regulations and are registered with the local council. When you sell your home, a buyer’s solicitor will often ask for it, so confirm it is part of the price and that you will receive it after the work.
The extras that move the price
Most of the spread between a £550 door and a £2,350 door comes from options. A February 2026 breakdown puts typical add-ons at:
- Decorative half-glazing: £200 to £400
- Bespoke RAL or dual-colour finish: £100 to £300
- Designer hardware: £50 to £150
- A new outer frame: £200 to £400
- Each sidelight or toplight panel: £200 to £500
RAL is the standard European colour-matching system, so a RAL finish means the door can match a specific shade, such as a window frame or a front gate.
Here is a worked example. Say a plain door in a standard colour has a base fitted price of £X. Add decorative half-glazing at the upper end (£400), a dual-colour finish (£300), designer hardware (£150) and one sidelight (£500). That is £1,350 in extras on top of £X, which is why two quotes for “a composite door” can differ so much. The extras are also where you can control your budget: choose the glazing and the finish you actually want, and leave the rest.

Colour is one of the easier places to personalise. Our composite door colours page shows what is available, and the grey and stone ranges are good places to start if you want a modern look.
If you are choosing a front door as part of a wider refit, matching hardware and finishes across the house is simple to plan. For interiors, bespoke interior doors give a designer the same control over finish and hardware that you have with an entrance door.
Style changes the shopping list, not only the price
Style is usually the reason a homeowner starts looking. Period-style designs suit period homes, and contemporary slab designs suit newer ones. Value Doors lists doors by style, so you can browse by the era of your house:
- 1930 style composite doors for interwar semis
- 1950 style composite doors for post-war houses
- Cambridge, Westminster and Harlington ranges for traditional and contemporary looks
Other door types sit in the same family. Composite French doors and composite stable doors are priced separately from a front door, so ask for those quotes by type.
Composite and uPVC: how the costs compare
Many buyers weigh composite against uPVC. One 2026 price guide puts a uPVC front or back door at £700 to £1,500 supplied and fitted, with prices reviewed in June 2026. A composite door at the same fitted level sits in a similar band at the lower end and above it as you add glazing, colour and hardware.
The choice is not only about the sticker price. Composite doors are built with a GRP skin and an insulating core, which gives a solid feel, a wide choice of colours and a timber-style look. They are also built around a strong frame and multipoint locking, and security is a priority for Value Doors, which fits its doors with advanced locking mechanisms. If you are replacing the windows alongside the door, uPVC windows are available from Value Doors too, so the whole job can sit with one supplier.
How to compare composite door quotes
Quote prices for the same brand and specification can vary by 30 to 40% between installers. So a method matters more than a bargain.
- Ask for the same specification. Door model, colour, glass, hardware and frame size should match on every quote.
- Check the quote is an installed price. It should include the door, frame, hardware, fitting, removal of the old door and a FENSA certificate, not just the door slab.
- Ask for both prices. Request supply-only and fitted figures so you can see what the labour costs.
- Get at least three quotes. The same guide recommends this, and it is the simplest way to see where the market is.
- Take your time. A quote that is only valid on the day of the visit leaves no time to compare.
- Check VAT. Confirm whether the figure includes it.
- Note the lead time. A cheaper quote with a long wait may cost more in the end if you are on a deadline.
Contractors and property managers can use the same checklist across several properties. A consistent specification makes it easy to see what each unit costs and to repeat an order.
Our view: why a straightforward quote saves money
Most of the frustration we hear about door pricing comes from comparing numbers that do not describe the same job. A price for a slab, a price for a door and frame, and a price for a fitted door with a certificate are three different things.
That is why we offer supply-only and fully fitted options on the same doors, and why we keep ordering simple. Our supply-only orders are delivered in 10 working days and our fitted orders in 3 to 4 weeks, so you can plan the job around a date and not a guess.
Security is the other half of the value. A door that looks good but is easy to defeat is poor value, so our doors are built with advanced locking mechanisms. Thousands of customers have ordered from us, and we want each of them, whether a homeowner, a contractor, a designer or a property manager, to know exactly what they are paying for before they order.
the author
Choosing your door with Value Doors
If you are ready to price a door, Value Doors supplies composite doors supply-only or fully fitted, with customisable designs and UK-wide delivery. Pick a style, choose the glazing and colour, and decide whether you want the door delivered or installed.
If the project goes beyond the front door, the same site offers bifold, sliding patio and aluminium single access doors. Published prices are £1,756 to £3,072 for aluminium bifold doors, £1,077 to £2,754 for aluminium sliding patio doors, and from £550 for aluminium single access doors. For a sense of how patio door pricing works, our patio door replacement cost guide breaks it down.
FAQ
How much does a composite front door cost in the UK?
A fully installed composite front door typically costs between £550 and £2,350. A plain door in a standard colour is at the lower end, and glazing, colour matching, new frames and side panels push the price up. Ask for a quote on your exact specification.
Is supply-only cheaper than fitted?
Yes, because it excludes the labour, disposal of the old door and certification. It suits contractors and anyone with their own installer. With Value Doors, supply-only orders are delivered in 10 working days.
What extras should I budget for?
Typical add-ons are decorative glazing at £200 to £400, a new outer frame at £200 to £400, and £200 to £500 for each sidelight or toplight, according to a February 2026 guide. Bespoke colours and designer hardware add smaller amounts.
Do I need a FENSA certificate for a new door?
Replacement external doors in a home must meet Building Regulations, and a FENSA certificate is the usual proof. Make sure a fitted quote includes it, as you may need it when you sell.
Sources
- Composite Front Door Cost UK 2026: Prices, Brands & Buying
- Door Installer Cost in Dudley | 2026 Price Guide
- Find and order your FENSA certificate
- uPVC door cost calculator UK 2026


